| 101 |
期刊論文 |
董崇民 |
Theophylline-Loaded Pectin/Chitosan Hydrochloride Submicron Particles Prepared by Spray Drying with a Continuous Feeding Ultrasonic Atomizer[111-1] |
2023-07-17 |
| 102 |
期刊論文 |
董崇民 |
In Situ Release of Ulvan from Crosslinked Ulvan/Chitosan Complex Films and Their Evaluation as Wound Dressings[111-1] |
2023-07-17 |
| 103 |
期刊論文 |
余宣賦 |
Characteristics and photocatalytic kinetics of ZnO films on glass tubes[111-1] |
2023-07-05 |
| 104 |
期刊論文 |
賴偉淇 |
Enhanced crystallization of poly (lactic acid) bioplastics by a green and facile approach using liquid poly (ethylene glycol)[111-1] |
2023-07-04 |
| 105 |
期刊論文 |
賴偉淇 |
Enhanced thermal performance of form-stable phase change materials with organic and inorganic supporting nanofillers[111-1] |
2023-07-04 |
| 106 |
期刊論文 |
何啟東 |
Two-Dimensional Conjugated Mass Transfer of Carbon Dioxide Absorption in a Hollow-Fiber Gas-Liquid Membrane Contactor[111-1] |
2023-07-04 |
| 107 |
期刊論文 |
何啟東 |
Synthesis, Characterization and Gas Adsorption of Unfunctionalized and TEPA-functionalized MSU-2[111-1] |
2023-07-03 |
| 108 |
期刊論文 |
黃招財 |
Investigation of Parameter Sensitivity and the Physical Mechanism for the Formation of a Core-Skin-Core (CSC) Structure in Two-Stage Co-Injection Molding[111-1] |
2023-07-03 |
| 109 |
期刊論文 |
黃招財 |
Correlation Between Fiber Orientation and Geometrical Shrinkage of Injected Parts Under the Influence of Flow-Fiber Coupling Effect[111-1] |
2023-07-03 |
| 110 |
期刊論文 |
何啟東 |
Optimization of CO2/H2 Separation over Ba-SAPO-34 Zeolite Membrane Synthesized by Microwave Heating[111-1] |
2023-07-01 |
| 111 |
期刊論文 |
何啟東 |
Enhancing growth environment for attached microalgae to populate onto spent coffee ground in producing biodiesel[111-1] |
2023-07-01 |
| 112 |
期刊論文 |
黃招財 |
Influence of back pressure and geometry on microstructure of injection-molded long-glass-fiber-reinforced polypropylene ribbed plates.[111-1] |
2023-06-30 |
| 113 |
期刊論文 |
鄭廖平 |
Preparation of poly(vinyl alcohol-co-ethylene) hollow fiber membranes for high-flux ultrafiltration applications[111-1] |
2023-02-15 |
| 114 |
期刊論文 |
許世杰 |
High-performance supercapacitor based on a ternary nanocomposites of NiO, polyaniline, and Ni/NiO-decorated MWCNTs[110-2] |
2026-08-04 |
| 115 |
期刊論文 |
許世杰 |
The effect of dual-doping on the electrochemical performance of LiNi0.5Mn1.5O4 and its application in full‐cell lithium‐ion batteries[110-2] |
2026-07-29 |
| 116 |
期刊論文 |
董崇民 |
Preparation and characterization of fast dissolving ulvan microneedles for transdermal drug delivery system[110-2] |
2026-07-27 |
| 117 |
期刊論文 |
許世杰 |
Preparation of Ni(OH)2/CuO heterostructures for improved photocatalytic degradation of organic pollutants and microorganism[110-2] |
2023-07-25 |
| 118 |
期刊論文 |
許世杰 |
Modification of aluminum current collectors with laser-scribed graphene for enhancing the performance of lithium ion batteries[110-2] |
2023-07-25 |
| 119 |
期刊論文 |
董崇民 |
Improved stability and film formability of oil-based silver nanoparticle suspensions by addition of polystyrene[110-2] |
2023-07-17 |
| 120 |
期刊論文 |
|
Solid–liquid interdiffusion bonding of Cu/In/Ni microjoints[110-2] |
2023-07-14 |
| 121 |
期刊論文 |
|
Improved stability and film formability of oil-based silver nanoparticle suspensions by addition of polystyrene[110-2] |
2023-07-14 |
| 122 |
期刊論文 |
林正嵐 |
Micropatterned Poly (3, 4-ethylenedioxythiophene) Thin Films with Improved Color-Switching Rates and Coloration Efficiency[110-2] |
2023-07-06 |
| 123 |
期刊論文 |
林正嵐 |
Electrochromic devices composed of polyaniline and tungsten trioxide thin films with succinonitrile/polyethylene glycol solid-state composite electrolyte[110-2] |
2023-07-05 |
| 124 |
期刊論文 |
何啟東 |
Artificial Neural Network (ANN) Modelling for Biogas Production in Pre-Commercialized Integrated Anaerobic-Aerobic Bioreactors (IAAB)[110-2] |
2023-07-04 |
| 125 |
期刊論文 |
何啟東 |
Solar-Assisted Membrane Distillation[110-2] |
2023-07-01 |
| 126 |
期刊論文 |
何啟東 |
Theoretical and Experimental Studies of CO2 Absorption in Double-Unit Flat-Plate Membrane Contactors[110-2] |
2023-07-01 |
| 127 |
期刊論文 |
何啟東 |
Optimizing Thermal Efficiencies of Power-Law Fluids in Double-Pass Concentric Circular Heat Exchangers with Sinusoidal Wall Fluxes[110-2] |
2023-07-01 |
| 128 |
期刊論文 |
黃招財 |
Fabrication and Property Characterization of Long-Glass-Fiber-Reinforced Polypropylene Composites Processed Using a Three-Barrel Injection Molding Machine[110-2] |
2023-06-30 |
| 129 |
期刊論文 |
鄭東文 |
Improved stability and film formability of oil-based silver nanoparticle suspensions by addition of polystyrene[110-2] |
2023-06-19 |
| 130 |
期刊論文 |
黃招財 |
熔膠流動與纖維耦合效應對纖維排向與其射出成品幾何變化關聯性之研究[110-2] |
2022-08-24 |
| 131 |
期刊論文 |
黃招財 |
Study on Machine identification and its effect on the RSM Optimization in Injection Molding[110-2] |
2022-08-17 |
| 132 |
期刊論文 |
黃招財 |
Discover Physical Mechanism of Interface Formation in Co-injection Using Rheological Behavior[110-2] |
2022-08-17 |
| 133 |
期刊論文 |
張 煖 |
Design and economic analysis of industrial-scale methanol-to-olefins plants[110-2] |
2022-03-07 |
| 134 |
期刊論文 |
鄭廖平 |
Facile formation of symmetric microporous PVDF membranes via vapor-induced phase separation of metastable dopes[110-2] |
2022-02-24 |
| 135 |
期刊論文 |
董崇民 |
Crosslinked complex films based on chitosan and ulvan with antioxidant and whitening activities[110-1] |
2025-07-13 |
| 136 |
期刊論文 |
張朝欽 |
Asymmetric and Bi-continuously Structured Polyethersulfone (PES) Membranes with Superior Water Flux for Ultrafiltration Application[110-1] |
2024-04-12 |
| 137 |
期刊論文 |
鄭廖平 |
Asymmetric and Bi-continuously Structured Polyethersulfone (PES) Membranes with Superior Water Flux for Ultrafiltration Application[110-1] |
2024-04-12 |
| 138 |
期刊論文 |
許世杰 |
Bio-Phenolic Resin Derived Porous Carbon Materials for High-Performance Lithium-Ion Capacitor[110-1] |
2023-07-25 |
| 139 |
期刊論文 |
許世杰 |
Morphology evolution and electrochemical behavior of NixMn1-x(OH)2 mixed hydroxides as high-performance electrode for supercapacitor[110-1] |
2023-07-25 |
| 140 |
期刊論文 |
賴偉淇 |
A simple low-cost method to prepare gel electrolytes incorporating graphene oxide with increased ionic conductivity and electrochemical stability[110-1] |
2023-07-05 |
| 141 |
期刊論文 |
何啟東 |
Enhancing absorption performance of CO2 by amine solution through the spiral wired channel in concentric circular membrane contactors[110-1] |
2023-07-01 |
| 142 |
期刊論文 |
|
Effects of surface diffusion and solder volume on porous-type Cu3Sn in Cu/ Sn/Cu microjoints[110-1] |
2022-08-23 |
| 143 |
期刊論文 |
何啟東 |
Systematic Performance Comparison of Fe3+/Fe0/Peroxymonosulfate and Fe3+/Fe0/Peroxydisulfate Systems for Organics Removal[110-1] |
2022-07-15 |
| 144 |
期刊論文 |
何啟東 |
Simulation and Optimization of Anaerobic Co-Digestion of Food Waste with Palm Oil Mill Effluent for Biogas Production[110-1] |
2022-07-14 |
| 145 |
期刊論文 |
何啟東 |
Modified Zeolite/Polysulfone Mixed Matrix Membrane for Enhanced CO2/CH4 Separation[110-1] |
2022-07-14 |
| 146 |
期刊論文 |
黃招財 |
A Methodology to Predict and Optimize Ease of Assembly for Injected Parts in a Family-Mold System[110-1] |
2022-07-13 |
| 147 |
期刊論文 |
許世杰 |
Morphology evolution and electrochemical behavior of NixMn1-x(OH)(2) mixed hydroxides as high-performance electrode for supercapacitor[110-1] |
2022-07-13 |
| 148 |
期刊論文 |
何啟東 |
Distillate flux enhancement of direct contact membrane distillation modules with inserting cross-diagonal carbon-fiber spacers[110-1] |
2022-07-05 |
| 149 |
期刊論文 |
何啟東 |
Conjugated mass transfer of CO2 absorption through concentric circular gas-liquid membrane contactors[110-1] |
2022-07-05 |
| 150 |
期刊論文 |
張 煖 |
Conjugated mass transfer of CO2 absorption through concentric circular gas-liquid membrane contactors[110-1] |
2022-03-07 |
| 151 |
期刊論文 |
張 煖 |
Enhancing absorption performance of CO2 by amine solution through the spiral wired channel in concentric circular membrane contactors[110-1] |
2022-03-07 |
| 152 |
期刊論文 |
何啟東 |
Synthesis and characterization of (3-aminopropyl) triethoxysilane (APTES) functionalized zeolite AlPO-18[110-1] |
2022-03-03 |
| 153 |
期刊論文 |
何啟東 |
Design and economic analysis of industrial-scale methanol-to-olefins plants[110-1] |
2022-03-03 |
| 154 |
期刊論文 |
何啟東 |
Theoretical and experimental studies of double-unit air gap membrane distillation (DUAGMD) module for seawater desalination[110-1] |
2022-03-03 |
| 155 |
期刊論文 |
鄭廖平 |
Use of packed scrap iron anodes for continuous electrochemical Cr(VI) reduction process in electroplating wastewater treatment[110-1] |
2022-02-24 |
| 156 |
期刊論文 |
陳逸航 |
Design and economic analysis of industrial-scale methanol-to-olefins plants[110-1] |
2022-02-22 |
| 157 |
期刊論文 |
陳逸航 |
Conjugated mass transfer of CO2 absorption through concentric circular gas-liquid membrane contactors[110-1] |
2022-02-22 |
| 158 |
期刊論文 |
何啟東 |
Synthesis and Characterization of MSU-2 for CO2 Adsorption[110-1] |
2021-08-18 |
| 159 |
期刊論文 |
許世杰 |
Unraveling the anomalous channel-length-dependent blue energy conversion using engineered alumina nanochannels[109-2] |
2025-07-27 |
| 160 |
期刊論文 |
董崇民 |
Curcumin-laden dual-targeting fucoidan/chitosan nanocarriers for inhibiting brain inflammation via intranasal delivery[109-2] |
2024-07-30 |
| 161 |
期刊論文 |
何啟東 |
Enhancing the permeate flux of direct contact membrane distillation modules with inserting 3D printing turbulence promoters[109-2] |
2024-03-11 |
| 162 |
期刊論文 |
張 煖 |
Enhancing the Permeate Flux of Direct Contact Membrane Distillation Modules with Inserting 3D Printing Turbulence Promoters[109-2] |
2024-03-11 |
| 163 |
期刊論文 |
陳逸航 |
Enhancing the Permeate Flux of Direct Contact Membrane Distillation Modules with Inserting 3D Printing Turbulence Promoters[109-2] |
2024-03-11 |
| 164 |
期刊論文 |
張 煖 |
Evaluation of process control schemes for sour water strippers in petroleum refining[109-2] |
2024-03-11 |
| 165 |
期刊論文 |
何啟東 |
Evaluation of Process Control Schemes for Sour Water Strippers in Petroleum Refining[109-2] |
2024-03-11 |
| 166 |
期刊論文 |
陳逸航 |
Evaluation of Process Control Schemes for Sour Water Strippers in Petroleum Refining[109-2] |
2024-03-11 |
| 167 |
期刊論文 |
何啟東 |
Stabilization of heavy metals loaded sewage sludge: Reviewing conventional to state-of-the-art thermal treatments in achieving energy sustainability[109-2] |
2023-07-05 |
| 168 |
期刊論文 |
董崇民 |
Dual‑curable anticorrosion coatings based on epoxymethacrylate/reduced graphene oxide composites[109-2] |
2022-07-24 |
| 169 |
期刊論文 |
董崇民 |
Physicochemical characteristics of thermo-responsive gelatin membranes containing carboxymethyl chitosan and poly(N‑isopropylacrylamide-co-acrylic acid)[109-2] |
2022-07-24 |
| 170 |
期刊論文 |
陳逸航 |
Design and economic analysis of industrial-scale methanol-to-olefins plants[109-2] |
2022-07-18 |
| 171 |
期刊論文 |
林正嵐 |
Nanoscale redox mapping at the MoS2-liquid interface[109-2] |
2022-07-18 |
| 172 |
期刊論文 |
何啟東 |
Optimizing Thermal Efficiencies of Double-Pass Cross-Corrugated Solar Air Heaters on Various Configurations with External Recycling[109-2] |
2022-07-15 |
| 173 |
期刊論文 |
何啟東 |
Conjugated Heat Transfer of Power-Law Fluids in Double-Pass Concentric Circular Heat Exchangers with Sinusoidal Wall Fluxes[109-2] |
2022-07-14 |
| 174 |
期刊論文 |
何啟東 |
CO2 adsorption of MSU-2 synthesized by using nonionic polyethyleneoxide (PEO)-based surfactants[109-2] |
2022-07-14 |
| 175 |
期刊論文 |
黃招財 |
The Low Breaking Fiber Mechanism and Its Effect on the Behavior of the Melt Flow of Injection Molded Ultra-Long Glass Fiber Reinforced Polypropylene Composites[109-2] |
2022-07-13 |
| 176 |
期刊論文 |
許世杰 |
Modification of aluminum current collectors with laser-scribed graphene for enhancing the performance of lithium ion batteries[109-2] |
2022-07-13 |
| 177 |
期刊論文 |
許世杰 |
Polyimide-derived carbon-coated Li4Ti5O12 as high-rate anode materials for lithium ion batteries[109-2] |
2022-07-13 |
| 178 |
期刊論文 |
許世杰 |
Substrate Lattice-Guided MoS2 Crystal Growth: Implications for van der Waals Epitaxy[109-2] |
2022-07-13 |
| 179 |
期刊論文 |
許世杰 |
Laser scribing of Ag-decorated graphene for high-performance and flexible heaters[109-2] |
2022-07-13 |
| 180 |
期刊論文 |
許世杰 |
Rapid Detection of Glucose on Nanostructured Gold Film Biosensor by Surface-Enhanced Raman Spectroscopy[109-2] |
2022-07-13 |
| 181 |
期刊論文 |
黃招財 |
STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs[109-2] |
2022-03-06 |
| 182 |
期刊論文 |
黃招財 |
STUDY ON THE QUANTIFICATION OF THE ADVANCEMENT OF CORE MATERIAL IN CO-INJECTION MOLDING PRODUCTS[109-2] |
2022-03-06 |
| 183 |
期刊論文 |
黃招財 |
INVESTIGATION ON THE DEGREE OF ASSEMBLY FOR COMPONENTS IN AN INJECTION FAMILY MOLD SYSTEM[109-2] |
2022-03-06 |
| 184 |
期刊論文 |
黃招財 |
纖維強化塑膠在射出成型製程中熔膠流動與纖維耦合效應之探索[109-2] |
2022-03-06 |
| 185 |
期刊論文 |
鄭廖平 |
Fabrication of high-flux asymmetric polyethersulfone (PES) ultrafiltration membranes by nonsolvent induced phase separation process: Effects of H2O contents in the dope[109-2] |
2021-03-11 |
| 186 |
期刊論文 |
余宣賦 |
Enhancing photocatalytic ability of TiO2 films using gel-derived P/Si-TiO2powder[109-1] |
2024-04-12 |
| 187 |
期刊論文 |
張 煖 |
Economic design of solar-driven membrane distillation systems for desalination[109-1] |
2024-03-11 |
| 188 |
期刊論文 |
何啟東 |
Economic Design of Solar-driven Membrane Distillation Systems for Desalination[109-1] |
2024-03-11 |
| 189 |
期刊論文 |
陳逸航 |
Economic Design of Solar-Driven Membrane Distillation Systems for Desalination[109-1] |
2024-03-11 |
| 190 |
期刊論文 |
|
Phase Characterization of Interfacial Reactions in the Ni/In/Cu Ternary System[109-1] |
2022-08-08 |
| 191 |
期刊論文 |
賴偉淇 |
Shape-stabilized poly(ethylene glycol) phase change materials with self-assembled network scaffolds for thermal energy storage[109-1] |
2022-07-04 |
| 192 |
期刊論文 |
張朝欽 |
Nano-titania/polyethersulfone composite ultrafiltration membranes with optimized antifouling capacity[109-1] |
2021-07-27 |
| 193 |
期刊論文 |
陳逸航 |
Reactant Feeding Strategy Analysis of Sodium Borohydride Hydrolysis Reaction Systems for Instantaneous Hydrogen Generation[109-1] |
2021-07-19 |
| 194 |
期刊論文 |
賴偉淇 |
A strategy for preparing solid polymer electrolytes via the electrospinning process[109-1] |
2021-07-16 |
| 195 |
期刊論文 |
賴偉淇 |
Novel green and sustainable shape-stabilized phase change materials for thermal energy storage[109-1] |
2021-07-16 |
| 196 |
期刊論文 |
董崇民 |
Carboxymethyl chitosan has sensitive two-way CO2-responsive hydrophilic/hydrophobic feature[109-1] |
2021-07-08 |
| 197 |
期刊論文 |
何啟東 |
Functionalized KIT-6/Polysulfone Mixed Matrix Membranes for Enhanced CO2/CH4 Gas Separation[109-1] |
2021-07-08 |
| 198 |
期刊論文 |
何啟東 |
Augmenting CO2 absorption flux through a gas-liquid membrane module by inserting carbon-fiber spacers[109-1] |
2021-07-08 |
| 199 |
期刊論文 |
黃招財 |
Influence of low-fracture-fiber mechanism on fiber/melt-flow behavior and tensile properties of ultra-long-glass-fiber-reinforced polypropylene composites injection molding[109-1] |
2021-07-02 |
| 200 |
期刊論文 |
黃招財 |
Investigation on the Coupling Effects Between Flow and Fibers on Fiber-Reinforced Plastic (FRP) Injection Parts[109-1] |
2021-07-02 |