| 201 |
期刊論文 |
林正嵐 |
Comparisons of the electrochromic properties of Poly (hydroxymethyl 3, 4-ethylenedioxythiophene) and Poly (3, 4-ethylenedioxythiophene) thin films and the photoelectrochromic devices using these thin films[108-1] |
2020-09-18 |
| 202 |
期刊論文 |
林正嵐 |
Influence of ferrocyanide on the long-term stability of poly (butyl viologen) thin film based electrochromic devices[108-1] |
2020-09-18 |
| 203 |
期刊論文 |
許世杰 |
Unraveling the Anomalous Surface-Charge-Dependent Osmotic Power Using a Single Funnel-Shaped Nanochannel[108-1] |
2020-07-23 |
| 204 |
期刊論文 |
何啟東 |
Zeolite RHO Synthesis Accelerated by Ultrasonic Irradiation Treatment[108-1] |
2020-07-15 |
| 205 |
期刊論文 |
何啟東 |
Evaluation of the Properties, Gas Permeability and Selectivity of Mixed Matrix Membrane Based on Polysulfone Polymer Matrix Incorporated with KIT-6 Silica[108-1] |
2020-07-15 |
| 206 |
期刊論文 |
何啟東 |
Mass transfer enhancement in double-pass concentric-tube mass exchangers under sinusoidal wall fluxes with external recycle[108-1] |
2020-07-15 |
| 207 |
期刊論文 |
黃招財 |
Investigation on the Fiber Orientation Distributions and Their Influence on the Mechanical Property of the Co-Injection Molding Products[108-1] |
2020-07-09 |
| 208 |
期刊論文 |
鄭東文 |
Fenton oxidation-based cleaning technology for powdered activated carbon-precoated dynamic membranes used in microfiltration seawater pretreatment systems[108-1] |
2020-07-02 |
| 209 |
期刊論文 |
何啟東 |
淡江大學教學實踐研究之推動歷程[108-1] |
2020-03-13 |
| 210 |
期刊論文 |
張 煖 |
Control of solvent-based post-combustion carbon capture process with optimal operation conditions[107-2] |
2024-03-11 |
| 211 |
期刊論文 |
何啟東 |
Control of Solvent-Based Post-Combustion Carbon Capture Process with Optimal Operation Conditions[107-2] |
2024-03-11 |
| 212 |
期刊論文 |
張朝欽 |
Preparation of Nanosilica/polyacrylate Antifog Coatings on Polycarbonate Substrates[107-2] |
2024-03-01 |
| 213 |
期刊論文 |
張朝欽 |
Preparation of superhydrophilic nanosilica/polyacrylate hard coatings on plastic substrate for antifogging and frost‐resistant application[107-2] |
2024-02-21 |
| 214 |
期刊論文 |
何啟東 |
3D printing design of turbulence promoters in a cross-flow microfiltration system for fine particles removal[107-2] |
2023-07-03 |
| 215 |
期刊論文 |
何啟東 |
Modeling to enhance attached microalgal biomass growth onto fluidized beds packed in nutrients-rich wastewater whilst simultaneously biofixing CO2 into lipid for biodiesel production[107-2] |
2022-07-18 |
| 216 |
期刊論文 |
何啟東 |
Heat Transfer in a Double-Pass Parallel-Plate Device for the Power-Law Fluids with Hybrid Boundary Conditions[107-2] |
2020-07-15 |
| 217 |
期刊論文 |
賴偉淇 |
Nanostructured polymers with embedded self-assembled networks: reversibly tunable phase behaviors and physical properties[107-2] |
2020-07-09 |
| 218 |
期刊論文 |
鄭廖平 |
Preparation of superhydrophilic nanosilica/polyacrylate hard coatings on plastic substrate for antifogging and frost-resistant applications[107-2] |
2020-07-03 |
| 219 |
期刊論文 |
鄭廖平 |
Phase inversion in reusable baths (PIRB): a new polymer membrane fabrication method as applied to EVOH[107-2] |
2020-07-03 |
| 220 |
期刊論文 |
黃招財 |
Investigation of the Viscoelastic Behavior Variation of Glass Mat Thermoplastics (GMT) in Compression Molding[107-2] |
2020-03-13 |
| 221 |
期刊論文 |
黃招財 |
Investigation on the internal mechanism of the deviation between numerical simulation and experiments in injection molding product development[107-2] |
2020-03-12 |
| 222 |
期刊論文 |
賴偉淇 |
Size-tunable silica nanowires prepared using reverse microemulsion-gel systems[107-2] |
2020-03-12 |
| 223 |
期刊論文 |
董崇民 |
Preparation of transparent nanocomposites from UV- and thermo-curable epoxyacrylate and graphene oxide for the application of corrosion protection coatings[107-2] |
2020-03-12 |
| 224 |
期刊論文 |
陳逸航 |
Dynamic Modeling and Control of the Carbon Dioxide Capture Process Using Monoethanolamine Solvent[107-2] |
2020-03-05 |
| 225 |
期刊論文 |
黃招財 |
Investigation on the Microstructures of Long Fiber and Their Influences on Warpage and Mechanical Property in Injection Reinforced Thermoplastics (FRT) Parts.[107-2] |
2020-02-19 |
| 226 |
期刊論文 |
黃招財 |
Study on the Viscoelasticity Properties of the Glass Mat Thermoplastics (GMT) in Compression Molding System.[107-2] |
2020-01-09 |
| 227 |
期刊論文 |
黃招財 |
Viscoelastic Effect on the Warpage Prediction Accuracy and Experimental Validation in Injection Molding.[107-2] |
2019-10-03 |
| 228 |
期刊論文 |
董崇民 |
Guided bone regeneration activity of different calcium phosphate/chitosan hybrid membranes[107-2] |
2019-10-01 |
| 229 |
期刊論文 |
董崇民 |
Miscibility and flexibility of poly(lactic acid) blends with octadecenylsuccinic anhydride[107-2] |
2019-10-01 |
| 230 |
期刊論文 |
鄭廖平 |
Preparation of nanosilica/polyacrylate antifog coatings on polycarbonate substrates[107-2] |
2019-09-16 |
| 231 |
期刊論文 |
鄭廖平 |
Preparation of particulate polyvinylidene fluoride membranes of different particle sizes for membrane distillation applications[107-2] |
2019-09-16 |
| 232 |
期刊論文 |
賴偉淇 |
Miscibility and flexibility of poly (lactic acid) blends with octadecenylsuccinic anhydride[107-2] |
2019-09-11 |
| 233 |
期刊論文 |
黃招財 |
玻璃纖維氈(GMT)在壓縮成型製程中黏彈特性如何變化之研究[107-2] |
2019-09-10 |
| 234 |
期刊論文 |
林國賡 |
玻璃纖維氈(GMT)在壓縮成型製程黏彈特性變化之研究[107-2] |
2019-09-09 |
| 235 |
期刊論文 |
鄭廖平 |
Formation of bicontinuous, hydrophobic nylon 12 membranes via cold‐solvent‐induced phase separation for membrane distillation application[107-2] |
2019-08-26 |
| 236 |
期刊論文 |
林國賡 |
Heat Transfer in a Double-pass Parallel-plate Device for the Power-law Fluids with Hybrid Boundary Conditions[107-2] |
2019-04-11 |
| 237 |
期刊論文 |
張 煖 |
Simulation of the dynamics and control responses of the carbon dioxide chemical absorption process using Aspen Custom Modeler[107-2] |
2019-04-09 |
| 238 |
期刊論文 |
陳逸航 |
Multi-objective optimization of mixed membrane reactors for autothermal reforming of methane[107-1] |
2024-03-01 |
| 239 |
期刊論文 |
何啟東 |
Multi-objective Optimization of Mixed Membrane Reactors for Autothermal Reforming of Methane[107-1] |
2024-03-01 |
| 240 |
期刊論文 |
張 煖 |
Multi-objective optimization of mixed membrane reactors for autothermal reforming of methane[107-1] |
2024-03-01 |
| 241 |
期刊論文 |
鄭廖平 |
Preparation of hydrophobic nanofibers by electrospinning of PMMA dissolved in 2-propanol and water[107-1] |
2020-03-13 |
| 242 |
期刊論文 |
賴偉淇 |
Effects of self-assembled sorbitol-derived compounds on the structures and properties of biodegradable poly (L-lactic acid) prepared by melt blending[107-1] |
2020-03-12 |
| 243 |
期刊論文 |
陳逸航 |
Control of Solvent-Based Post-Combustion Carbon Capture Process with Optimal Operation Conditions[107-1] |
2020-03-05 |
| 244 |
期刊論文 |
鄭東文 |
Structural design of a rotating disk dynamic microfilter in improving filtration performance for fine particle removal[107-1] |
2019-10-09 |
| 245 |
期刊論文 |
何啟東 |
Ion-Exchanged Silicoaluminophosphate-34 Membrane for Efficient CO2/N2 Separation with Low CO2 Concentration in the Gas Mixture[107-1] |
2019-09-23 |
| 246 |
期刊論文 |
鄭廖平 |
Preparation of dye-grafted-silica/poly(acrylate) color coatings with enhanced color stability at elevated temperatures[107-1] |
2019-09-16 |
| 247 |
期刊論文 |
董崇民 |
Synthesis of pH-sensitive sulfonamide-based hydrogels with controllable crosslinking density by post thermo-curing[107-1] |
2019-09-03 |
| 248 |
期刊論文 |
何啟東 |
Distillate Flux Enhancement of the Concentric Circular Direct Contact Membrane Distillation Module with Spiral Wired Flow Channel[107-1] |
2019-08-20 |
| 249 |
期刊論文 |
何啟東 |
Permeate flux enhancement with roughened-surface flow channel in air gap membrane distillation systems[107-1] |
2019-04-12 |
| 250 |
期刊論文 |
張朝欽 |
Preparation of dye-grafted-silica/poly(acrylate) color coatings with enhanced color stability at elevated temperatures[107-1] |
2019-03-29 |
| 251 |
期刊論文 |
林正嵐 |
Controlling molecular conformations of alkyl bridged bis-aminostyrene: Investigation of inter-chromophore interaction[107-1] |
2019-03-15 |
| 252 |
期刊論文 |
林國賡 |
Rheology of poly(lactic acid)/poly(trimethylene terephthalate) blends compatibilized by clay or maleic anhydride-grafted poly(ethylene-octene) elastomer[107-1] |
2019-03-15 |
| 253 |
期刊論文 |
何啟東 |
Device Performance Improvement of Recycling Double-Pass Cross-Corrugated Solar Air Collectors[106-2] |
2024-03-15 |
| 254 |
期刊論文 |
張 煖 |
Device performance improvement of recycling double-pass cross-corrugated solar air collectors[106-2] |
2024-03-15 |
| 255 |
期刊論文 |
何啟東 |
Co-cultivation of activated sludge and microalgae for the simultaneous enhancements of nitrogen-rich wastewater bioremediation and lipid production[106-2] |
2021-07-09 |
| 256 |
期刊論文 |
林正嵐 |
Direct electrodeposition of micropatterned Prussian blue films on indium tin oxide/polyethylene terephthalate substrate by electrostatic field-assisted potentiostatic and pulse potentiostatic deposition methods[106-2] |
2019-09-26 |
| 257 |
期刊論文 |
鄭廖平 |
Effect of inner non-solvent condition on morphology of PVDF hollow fiber membranes prepared by NIPS spinning process[106-2] |
2019-08-26 |
| 258 |
期刊論文 |
何啟東 |
Mechanistic kinetic models describing impact of early attachment between Chlorella vulgaris and polyurethane foam material in fluidized bed bioreactor on lipid for biodiesel production[106-2] |
2019-08-20 |
| 259 |
期刊論文 |
黃招財 |
How to use CAE to Diagnose the Performance Problem of the Existed Machine in Injection Molding to Face Automation Challenge[106-2] |
2019-05-31 |
| 260 |
期刊論文 |
黃招財 |
Geometrical Effects on Fiber Micro-structure Variations and the Influences on Long Fiber Reinforced Thermoplastics (FRT) Parts[106-2] |
2019-05-31 |
| 261 |
期刊論文 |
黃招財 |
Investigation on the Viscosity Characterization of the Glass Mat Thermoplastics (GMT) in Compression Molding System[106-2] |
2019-05-31 |
| 262 |
期刊論文 |
張朝欽 |
Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates[106-2] |
2019-05-30 |
| 263 |
期刊論文 |
董崇民 |
Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock[106-2] |
2019-05-24 |
| 264 |
期刊論文 |
何啟東 |
Theoretical and experimental studies of CO2 absorption by the amine solvent system in parallel-plate membrane contactors[106-2] |
2019-05-24 |
| 265 |
期刊論文 |
董崇民 |
Studies on the alcoholysis of poly(3-hydroxybutyrate) and the synthesis of PHB-b-PLA block copolymer for the preparation of PLA/PHB-b-PLA blends[106-2] |
2019-05-14 |
| 266 |
期刊論文 |
董崇民 |
Effect of a low-molecular-weight compatibilizer on the immiscible blends of cellulose acetate propionate and poly(butylene terephthalate)[106-2] |
2019-05-14 |
| 267 |
期刊論文 |
賴偉淇 |
Epoxy toughening using self-assembled nanofibrillar scaffolds formed by organogels[106-2] |
2019-04-12 |
| 268 |
期刊論文 |
鄭東文 |
High-efficiency hollow fiber arrangement design to enhance filtration performance by CFD simulation.[106-2] |
2019-04-12 |
| 269 |
期刊論文 |
何啟東 |
Mesoporous Materials Synthesized by Novel Reflux Synthesis Method[106-2] |
2019-04-12 |
| 270 |
期刊論文 |
鄭廖平 |
Preparation of UV-cured Spironaphthooxazine/Silica/Polyacrylate Photochromic Hard Coatings on Plastic Substrates[106-2] |
2019-04-09 |
| 271 |
期刊論文 |
黃招財 |
Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding[106-2] |
2019-04-09 |
| 272 |
期刊論文 |
陳錫仁 |
程序設計與Aspen Plus[106-2] |
2018-03-15 |
| 273 |
期刊論文 |
何啟東 |
Computational Fluid Dynamics Simulation Study of a Novel Membrane Contactor for Simultaneous Carbon Dioxide Absorption and Stripping[106-1] |
2024-03-15 |
| 274 |
期刊論文 |
陳逸航 |
Computational fluid dynamics simulation study of a novel membrane contactor for simultaneous carbon dioxide absorption and stripping[106-1] |
2024-03-15 |
| 275 |
期刊論文 |
董崇民 |
Temperature/pH/Enzyme Triple-Responsive Cationic Protein/PAA‑b‑PNIPAAm Nanogels for Controlled Anticancer Drug and Photosensitizer Delivery against Multidrug Resistant Breast Cancer Cells[106-1] |
2021-07-26 |
| 276 |
期刊論文 |
何啟東 |
Treatment of Palm Oil Mill Effluent Using Combination System of Microbial Fuel Cell and Anaerobic Membrane Bioreactor[106-1] |
2021-07-21 |
| 277 |
期刊論文 |
何啟東 |
Lipid for biodiesel production from attached growth Chlorella vulgaris biomass cultivating in fluidized bed bioreactor packed with polyurethane foam material[106-1] |
2019-09-23 |
| 278 |
期刊論文 |
何啟東 |
The influences of recycle effect on double-pass V-corrugated solar air heaters[106-1] |
2019-08-20 |
| 279 |
期刊論文 |
張 煖 |
Computational Fluid Dynamics Simulation Study of a Novel Membrane Contactor for Simultaneous Carbon Dioxide Absorption and Stripping[106-1] |
2019-05-22 |
| 280 |
期刊論文 |
張 煖 |
Experimental and simulation study of a novel hybrid absorption and stripping membrane contactor for carbon capture[106-1] |
2018-09-19 |
| 281 |
期刊論文 |
鄭東文 |
Effectiveness of a Hydrocyclone in Separating Particles Suspended in Power Law Fluids[106-1] |
2018-08-27 |
| 282 |
期刊論文 |
鄭廖平 |
Preparation of UV-cured spironaphthooxazine/silica/polyacrylate photochromic hard coatings on plastic substrates[106-1] |
2018-05-03 |
| 283 |
期刊論文 |
林國賡 |
The different viscosity arrangement effects on the variation of interface between skin and core in co-injection molding[106-1] |
2018-05-03 |
| 284 |
期刊論文 |
鄭東文 |
Integrating Microfiltration with Cocrystallization for Separating Glucose from Ethanol Aqueous Solution.[106-1] |
2018-04-13 |
| 285 |
期刊論文 |
董崇民 |
Fiber and film developments from immiscible blends of cellulose acetate propionate and poly(butylene terephthalate)[106-1] |
2018-03-30 |
| 286 |
期刊論文 |
鄭東文 |
Dynamic membranes of powder-activated carbon for removing microbes and organic matter from seawater[106-1] |
2018-03-30 |
| 287 |
期刊論文 |
何啟東 |
Distillate flux enhancement in the air gap membrane distillation with inserting carbon-fiber spacers[106-1] |
2017-12-18 |
| 288 |
期刊論文 |
黃招財 |
Miscibility and toughness improvement of poly(lactic acid)/poly(3-Hydroxybutyrate) blends using a melt-induced degradation approach[105-2] |
2024-04-12 |
| 289 |
期刊論文 |
董崇民 |
Miscibility and toughness improvement of poly(lactic acid)/poly(3-hydroxybutyrate) blends using a melt-induced degradation approach[105-2] |
2024-04-12 |
| 290 |
期刊論文 |
何啟東 |
Theoretical and experimental studies of direct contact membrane distillation modules with inserting W-shaped carbon-fiber spacers[105-2] |
2024-03-04 |
| 291 |
期刊論文 |
林正嵐 |
Electrochromic and photoelectrochromic properties of sol–gel derived tungsten trioxide/titania composite thin films[105-2] |
2020-07-22 |
| 292 |
期刊論文 |
黃招財 |
Optimizing the warpage of injection molding parts using 3D volume shrinkage compensation method[105-2] |
2019-09-02 |
| 293 |
期刊論文 |
何啟東 |
Investigation on the performance of hybrid anaerobic membrane bioreactors for fouling control and biogas production in palm oil mill effluent treatment[105-2] |
2019-08-20 |
| 294 |
期刊論文 |
鄭廖平 |
Effects of bath temperature on the morphology and performance of EVOH membranes prepared by the cold-solvent induced phase separation (CIPS) method[105-2] |
2018-11-07 |
| 295 |
期刊論文 |
鄭廖平 |
Effects of bath temperature on the morphology and performance of EVOH membranes prepared by the cold-solvent induced phase separation (CIPS) method[105-2] |
2018-09-04 |
| 296 |
期刊論文 |
黃招財 |
Simulation of dynamic gas penetrations on fingering behaviors during gas-assisted injection molding[105-2] |
2018-08-16 |
| 297 |
期刊論文 |
何啟東 |
Efficiency of recycling double-pass V-corrugated solar air collectors[105-2] |
2018-08-08 |
| 298 |
期刊論文 |
何啟東 |
CFD study of hybrid membrane contactors for absorption and stripping of carbon dioxide[105-2] |
2018-06-14 |
| 299 |
期刊論文 |
鄭廖平 |
Effect of solvent on the dipole rotation of poly(vinylidene fluoride) during porous membrane formation by precipitation in alcohol baths[105-2] |
2018-05-03 |
| 300 |
期刊論文 |
張 煖 |
CFD study of hybrid membrane contactors for absorption and stripping of carbon dioxide[105-2] |
2018-04-16 |